MALCON4/4E is a multifunctional device consisting of:
- Electronic length controller for defining line strokes and line intervals
for manual, semi-automatic and automatic marking
- Paint quantity control unit
- Documentation unit
MALCOM 4/4E Control and Documentation Unit
MALCON4/4E can perform fully automatic country-specific markings of up to 3 parallel lines.
Data export is possible via PDA, USB stick or GPS/GSM module (Location via GPS and data transmission via GSM) for marking and thickness tests.
Program changes during the marking operation are possible, whereby the stroke-interval cycle must end before the start of the new program.
If you want two programs to run in parallel (e.g. for the execution of a gutter marking during the marking process), this is also possible with MALCON4/4E. This means that even two different line combinations are possible.
The direction of travel recognition ensures that the machine can be manoeuvred with confidence when the programme is in a line-interval. This allows you to start marking at the correct point again.
Switching the guns on or off during marking. The start-trace of the switched-on gun and the end-trace of the switched-off gun work synchronously.
Optional:
– Acknowledgement system
– Reversing camera
– MultiDotLine® control
Recording and monitoring of the current flow rate of the metering pumps for:
1-component cold paints and sprayable 2c cold plastic paints (piston pump) in low-pressure (Airspray) and high-pressure (Airless) processes
2c cold plastic paints (bellows pump)
thermoplastic
¿Necesita más información?
Si no localiza lo que busca, precisa una oferta concreta, o tiene alguna duda contacte con nosotros sin compromiso, estaremos encantados de atenderles.
Contamos con descuentos especiales para administraciones públicas.
